Jack's Magic Stain Solution #1 - The Iron, Cobalt & Spot Etching Stuff
Restore your pool's surface to its original beauty with Jack's Magic Stain Solution #1 - The Iron, Cobalt & Spot Etching Stuff. This powerful, non-acidic formula is specifically designed to eliminate tough rust-colored iron stains, dark blue cobalt spots, and unsightly spot-etching without the hassle of draining your pool. Safe for all pool finishes, including plaster, fiberglass, and vinyl, this solution works quickly within 48 hours and requires only minimal rebalancing of pool chemistry afterward. Replace the need for an aggressive acid wash and keep your pool sparkling clean with this professional-grade, easy-to-use granular treatment.
Key Features
- Targets Specific Stains: Effectively removes iron, cobalt, and spot-etching stains.
- Safe for All Pool Surfaces: The non-acidic and non-aggressive formula will not harm plaster, vinyl, or fiberglass finishes.
- Works Without Draining: Eliminates the need to drain the pool or perform manual scrubbing for many stains.
- Fast Acting: Stains are typically removed easily and effectively within 48 hours of application.
- Minimal Rebalancing: Requires only minimal rebalancing of pool chemicals after treatment is complete.
- Easy Application: Granular formula is broadcast over the stained area (dosage is 2 lbs per 12,000 gallons).
Product Specifications
Brand
Jack's Magic Products
Product Name
Stain Solution #1 - The Iron, Cobalt & Spot Etching Stuff
Product Type
Metal/Stain Remover
Form
Granular powder
Product Weight
1 lb (0.45 kg) container
Formula Base
Non-acidic and non-aggressive formulation
Application
Swimming Pool (all surfaces)
Primary Usage
Removes iron, cobalt, and spot etching stains
Treatment Time
Typically works within 48 hours
Required Use with
A sequestrant (e.g., The Blue Stuff) is required for proper filtration
Dosage Rate
2 lbs per 12,000 gallons of water
Compatibility
Safe for all pool finishes, including plaster, fiberglass, and vinyl
Warnings and Disclaimers
- **Do not** swim during the treatment process, as chlorine levels must be lowered below 1 ppm for the product to work effectively.
- **Do not** mix with other chemicals or oxidizing agents.
- **Wear safety glasses and gloves** when handling this product to avoid contact with eyes, skin, or clothing.
- Ensure the pool pump is running continuously for 48 hours during treatment, and turn off any chlorinators or salt generators.
- Store the product in a cool, dry place away from heat or open flame.
- Always use a **Stain ID Kit** first to confirm the stain type is iron or cobalt, as this product is not effective on copper stains (which require a different solution).
- After the treatment is complete, clean the filter and slowly re-balance the water chemistry.
Jack's Magic
JMIRON1
Jack's Magic Stain Solution #1 - The Iron, Cobalt & Spot Etching Stuff
$26.35
/
Shipping calculated at checkout.
Pickup available at Marathon FL
Usually ready in 24 hours
