Pool Patch White Hydraulic Cement 50lbs
Repair your concrete pool without draining the water using Perma-Pool Patch White Hydraulic Cement 50 lbs (also known as CGM Inc Perma Pool Patch 50lb 50PL). This strong, rapid-setting, high-strength mortar is specifically formulated for use in or out of water, providing a permanent repair solution for cracks and leaks in concrete pools, ponds, or holding tanks.
Key Features & Benefits:
- Underwater Application: Uniquely designed to be applied underwater, allowing you to patch your pool without the hassle of draining it.
- Rapid Setting: A fast-setting solution that achieves a strong bond quickly, allowing you to get the job done efficiently (sets in minutes and cures in 3-4 hours).
- Superior Strength & Bonding: This product is up to twice as strong as ordinary cement and offers superior bonding power to old or new concrete, masonry, and metal surfaces.
- Waterproof & Durable: Once set, the patch is resistant to hydrostatic pressure, is chloride and metal-free, and creates a permanent, watertight seal that is freeze-thaw stable.
- Easy to Use: Simply mix with water to achieve a putty consistency and apply; no complicated techniques are required. It can also be shaved and molded to the desired contour.
- Versatile Repair: Ideal for repairing small cracks, delamination areas, and general patching where a high-strength, fast-setting waterproof repair is needed.
Specifications
Product Name
Perma-Pool Patch White Hydraulic Cement
Manufacturer Part #
50PL (CGM Inc)
Package Weight
50 lbs (Pail)
Color
White (Tintable)
Mixing Ratio
3 Parts Powder : 1 Part Water
Initial Set Time
10 - 15 Minutes
Full Cure Time
3 - 4 Hours
Compressive Strength
>2,500 psi (24 hrs)
Application Temp
40°F - 95°F
Bond Strength
3x Ordinary Cement
Pro Tips for Professional Results
- Small Batches: Only mix what can be applied in 8-10 minutes. This product sets extremely fast.
- The Glove Trick: For underwater repairs, ball the mixed putty in your gloved hand until it begins to feel warm/firm, then press and hold it into the crack for at least 60 seconds.
- Texture Match: After the initial set, you can use a trowel or tool to shave and mold the patch flush with the surrounding pool contour.
- Temperature Control: In hot weather, use ice water to slow the set; in cold weather, use warm water to accelerate it.
Warnings and Disclaimers
- Caustic Material: Contains Portland Cement and Silica. Can cause serious eye damage and skin irritation. Wear safety goggles and rubber gloves.
- Respiratory Hazard: Do not breathe dust; use a NIOSH-approved mask. Contains crystalline silica (known to the State of California to cause cancer).
- Substrate Prep: Not for use on moving cracks or as a broad surface coating. Surface must be clean and free of algae, oils, or loose debris.
- Storage: Store in a cool, dry place. Keep container tightly closed when not in use to prevent moisture activation.
Pool Patch White Hydraulic Cement 50lbs
$50.00
/
Shipping calculated at checkout.
SpecChem
Pickup available at Marathon FL
Usually ready in 24 hours
