Jandy® JHP & JHPU Seal Kit GO-KIT77
Keep your Jandy pool pump running at peak efficiency with the
Jandy® JHP & JHPU Seal Kit GO-KIT77
(Aladdin GO-KIT77 or APCK1181). This comprehensive tune-up kit provides all the necessary O-rings, gaskets, and seals to perform a complete service or motor replacement on Jandy JHP and JHPU series swimming pool pumps.
Key Features & Benefits:
- Complete Overhaul Solution: Includes all essential replacement components in one convenient package, taking the guesswork out of maintenance and repairs.
- Prevents Costly Leaks: Designed to restore reliable, leak-free sealing, protecting your pump motor from water damage and optimizing overall pump performance.
- Essential Maintenance: Highly recommended to replace all seals and gaskets, especially when installing a new motor, to ensure proper mating and prevent premature failure.
- Durable, High-Quality Parts: Features high-quality rubber components and a premium shaft seal (AS-601) built for lasting performance in pool environments.
- Includes Lubricant: Comes with a packet of Magic Lube®, a PTFE-based sealant/lubricant, to facilitate smooth installation and provide a secure seal.
Kit Contents (per Super-Pro specifications):
- 1 x AS-601 Seal
- 1 x G-413 Body Gasket
- 1 x O-64 Diffuser O-Ring (3/4 hp - 2.5 hp models)
- 1 x O-275 Diffuser O-Ring (3 hp models)
- 1 x O-465 Lid O-Ring
- 2 x O-652 Coupling Nut O-Ring
- 1 x Packet of Aladdin's Magic Lube
Specifications
Product Type
Seal & Gasket Kit (Tune-up kit)
Compatibility
Jandy JHP and JHPU series pumps
Material(s)
Rubber O-rings/gaskets, Mechanical Seal: Buna elastomers with ceramic and phenolic parts
Contents
1x Shaft Seal (AS-601), 1x Body Gasket (G-413), 1x Diffuser Cone O-Ring (O-64), 1x Diffuser O-Ring (O-275), 1x Lid O-Ring (O-465), 2x Coupling Nut O-Ring (O-652), and a packet of Magic Lube lubricant
Weight
Approximately 0.3 lbs to 1.00 lbs
Dimensions (Packaging)
Approximately 8.5 x 7.75 x 0.35 in
Warnings and Disclaimers
- Electrical Hazard: To reduce the risk of electric shock, always disconnect all power to the pump motor at the circuit breaker before attempting any service.
- Qualified Professional: This product should be installed and serviced by a qualified professional.
- Water Only: NEVER operate the pump without water, as water acts as a coolant and lubricant for the mechanical shaft seal; running it dry will damage the seals and void the warranty.
- Genuine Parts: This is an aftermarket replacement compatible with Jandy equipment. Certain manufacturers, including Jandy/Fluidra, do not honor warranties for products purchased online, so warranty coverage may be limited.
- Chemicals: Do NOT add undiluted chemicals directly into the pump's strainer housing, as this can damage the pump components.
- Lubricant Type: Only use a water-based, PTFE lubricant like Magic Lube; petroleum-based products will deteriorate the rubber components quickly.
Pro Tips
- Replace When Replacing Motor: It is highly recommended to replace the seal and gaskets using this kit whenever you replace your pump motor. An old seal will not mate properly with a new motor and is likely to leak.
- Lubricate O-rings: Use the included **Magic Lube** to lubricate all O-rings and gaskets during installation to help ensure a proper, leak-free seal and prevent damage.
- Protect Seal Faces: The lapped and polished faces of the new mechanical seal are easily scratched; protect them from dirt and fingerprints during installation.
- Ensure Correct Assembly: Note how the old seal is assembled to ensure the replacement seal is installed in an identical manner.
- Clean Surfaces: Clean the shaft and seal counterbore surfaces thoroughly to remove any rust or debris before installing the new seal.
Aladdin
GO-KIT77
Jandy® JHP & JHPU Seal Kit GO-KIT77
$32.00
/
Shipping calculated at checkout.
Pickup available at Marathon FL
Usually ready in 24 hours
