Aladdin
GO-KIT3
Hayward® Super Pump® 1600,2600,2600X Seal Kit GO-KIT3
$30.77
/
Shipping calculated at checkout.
Fast shipping
Ships in 2 to 3 business days
Pickup available at Marathon FL
Usually ready in 24 hours
Product Description
Aladdin GO-KIT3 Seal & Gasket Kit for Hayward Super Pump 1600, 2600, & 2600X Series
Ensure a comprehensive, watertight seal and restore optimal performance to your pool pump with the Aladdin GO-KIT3 all-in-one seal and gasket replacement kit. This kit is designed for a complete rebuild of the popular Hayward Super Pump models, including the 1600, 2600, and 2600X series (1/2 HP to 2 HP, single and dual speed pumps). It contains all necessary O-rings, gaskets, and a motor shaft seal to prevent water leaks and protect your motor from damage. Each kit also includes a packet of high-quality Magic Lube® PTFE lubricant for easy, reliable installation.
Key Features
- Comprehensive Rebuild Kit: Includes all essential seals and gaskets for a complete pump overhaul in one package, taking the guesswork out of repairs.
- Wide Compatibility: Designed to fit all Hayward Super Pump models: 1600, 2600, and 2600X series, including variable speed models.
- Stops Leaks & Protects Motor: Replaces worn components to prevent water intrusion that can damage the motor and ensures proper sealing and pressure.
- All Necessary Components Included:
- (1) AS-1521 Motor Shaft Seal (Hayward Equivalent: SPX1600Z2)
- (1) G-95 Housing Gasket (Hayward Equivalent: SPX1600T)
- (1) O-141 Diffuser Gasket (Hayward Equivalent: SPX1600R)
- (1) O-177 Lid O-Ring (Hayward Equivalent: SPX1600S)
- (1) Packet of Magic Lube® lubricant
- Easy Installation: Simplifies the repair process, making it suitable for both pool professionals and DIY enthusiasts.
- Includes Magic Lube: Comes with a PTFE-based sealant/lubricant to ensure a smooth, watertight seal during assembly.
- Standard Chlorine Use: This standard kit is for use in chlorine pools. A separate Viton (GO-KIT3V) version is available for saltwater applications.
Specifications
Product Type
Seal & Gasket Kit (Tune-up kit)
Compatibility
Hayward Super Pump models SP1600, SP2600, and SP2600X series (including VSP and dual speed variants); Does NOT fit Super Pump II or MaxFlo pumps
Material(s)
Rubber gaskets/O-rings, Shaft Seal: Buna elastomers with ceramic and phenolic primary rings
Contents
1x Shaft Seal (AS-1521 or PS-201/SPX1600Z2), 1x Housing Gasket (G-95 or SPX1600T), 1x Diffuser Gasket (O-141 or SPX1600R), 1x Lid O-Ring (O-177 or SPX1600S), 1x Packet of Magic Lube (PTFE-based lubricant)
Weight
Approximately 0.25 lbs to 1.00 lbs depending on packaging
Dimensions (Packaging)
Approximately 8.75 x 7.75 x 0.25 inches
Warnings and Disclaimers
- Electrical Hazard: To reduce the risk of electric shock, always disconnect all power to the pump motor at the circuit breaker before attempting any service.
- Qualified Professional: This product should be installed and serviced by a qualified professional.
- Water Only: NEVER operate the pump without water, as water acts as a coolant and lubricant for the mechanical shaft seal; running it dry will damage the seals and void the warranty.
- Genuine Parts: Use of non-Hayward replacement parts (or in the case of this kit, an aftermarket kit) may void the original pump's warranty.
- Chemicals: Do NOT add undiluted chemicals directly into the pump's strainer housing, as this can damage the pump components and voids the warranty.
Pro Tips
- Replace When Replacing Motor: It is highly recommended to replace the seal and gaskets using this kit whenever you replace your pump motor. An old seal will not mate properly with a new motor and is likely to leak.
- Lubricate O-rings: Use the included Magic Lube (or a similar water-based, PTFE lubricant) to lubricate all O-rings and gaskets during installation to help ensure a proper seal and prevent damage.
- Ensure Correct Fit: Double-check your specific pump model number to ensure it is compatible with the GO-KIT3, as it is not for Super Pump II models.
- Prevent Loss of Prime: Replacing the seal kit can help fix an air leak causing a loss of prime, but first ensure all other potential air leak sources (valves, plumbing) are sealed and functioning correctly.
- Avoid Air Purging with High Pressure: When air purging the system, use only a low-pressure (below 5 PSI), high-volume blower to avoid the risk of explosion or severe injury.
