Home Shop All E-Z Weld 204 Enviro PVC Cement - Clear, Medium Body

E-Z Weld 204 Enviro PVC Cement - Clear, Medium Body

E-Z Weld 204 Enviro PVC Cement is a clear, medium-bodied, fast-setting solvent cement designed for joining PVC pipe and fittings up to 6" Schedule 40 or 4" Schedule 80 with an interference fit. It's the most widely used cement in the E-Z Weld solvent cement line, offering a cost-effective, reliable bond for pool, plumbing, and irrigation applications. This low-VOC formula is NSF certified for drain, waste, and potable water systems and carries the UPC seal, meeting ASTM D2564 standards. Simply apply with the built-in dauber cap for a strong, leak-proof joint.

Medium body formula provides good gap-filling for secure joints
Fast-set cure time speeds up installation on pipe up to 6" (Sch. 40) or 4" (Sch. 80)
NSF certified & UPC listed for potable water, drain, waste, and vent systems
Low VOC (≤415 g/L) formula meets SCAQMD 1168/316A requirements
Usable in temperatures from 32°F to 110°F; 3-year shelf life unopened

Specifications

E-Z Weld 204 Enviro PVC Cement - Clear, Medium Body, 2 oz.

E-Z Weld 204 Enviro is a medium bodied, medium set, clear PVC solvent cement formulated to provide good gap-filling properties for joining PVC pipes and fittings up to 6" diameter, interference fit. This 2 oz. can is a low-VOC formula suited for plumbing, pressure/non-pressure applications, electrical conduit, and PVC foam core.

BrandE-Z Weld

Product Name204 Enviro PVC Cement - Clear, Medium Body

Model/SKU410226

UPC0812574102260

Product TypePVC/uPVC Solvent Cement (Adhesive)

Net Fill Volume2 fl. oz. (0.06 L)

Cap TypeDauber cap

CertificationsNSF International certified; listed IAPMO; UPC seal; meets ASTM D2564

ColorClear

Body / SetMedium Bodied / Medium Set

Specific Gravity / Density0.951 (g/cm³ at 73°F)

Viscosity500 - 700 cP at 73°F

VOC ContentMax 415 g/L (SCAQMD 1168/316A)

Application Temperature32°F - 110°F (0°C - 43°C)

Storage Temperature45°F - 110°F (7°C - 43°C)

Shelf Life3 years (unopened can)

Units per Case48

Weight per Case10 lb (4.55 kg)

Cube per Case0.328 cu ft (0.009 cu m)

Cases per Pallet100

Key Features & Performance

Medium-Bodied Gap Filling: Formulated as a medium bodied, medium set cement that provides good gap filling properties for joining PVC pipes and fittings up to 6" diameter, interference fit.

Broad Diameter Coverage: Rated for use on pipe and fittings up to 6" (160 mm) diameter for Schedule 40 and up to 4" (110 mm) for Schedule 80.

Low-VOC Formula: Meets low-VOC requirements with a maximum VOC content of 415 g/L per SCAQMD Rule 1168, Test Method 316A.

Third-Party Certified: This product is tested, certified and approved by NSF International for use on drain, waste and potable water systems, is listed by IAPMO, carries the Uniform Plumbing Code (UPC) seal, and meets ASTM Standard D2564.

Quality Controlled Batches: Every batch of cement is carefully checked and monitored to assure consistently high quality standards, with records of every batch kept and all ingredients purchased from approved suppliers.

Installation & Compatibility

Use the Right Primer: For a superior joint, use with E-Z Weld Primer, Purple (No. 212) or Clear (No. 211), before applying cement.
Never Modify the Cement: Never add thinner or additive to the cement, and never use the cement if it is stringy or jelly-like.
Follow the Label: Always follow the instructions on the product label for surface preparation, application, and joint assembly.
Respect Cure Schedules: ASTM has developed a cure-time schedule based on pipe size, temperature, humidity, and test pressure (e.g. a 2" pipe joint made at 55°F, 50% RH, and 100 psi test pressure requires a 4 hour cure time) - consult the ASTM guide for your specific joint conditions.
Mind Application Conditions: Apply only within the 32°F to 110°F usage temperature range and store the product between 45°F and 110°F.