Home

204 EZW ENVIRO PVC MB CLR PT

E-Z Weld Enviro 204 Clear PVC Cement, 1 pint, provides a low-VOC, medium-body solvent weld for Schedule 40 and Schedule 80 PVC pipe systems.

The E-Z Weld Enviro 204 Medium Body Clear PVC Cement is a one-pint, low-VOC solvent cement for joining rigid PVC and uPVC pipe and socket-style fittings. Its medium body provides gap-filling performance for plumbing, pool and spa, pressure, non-pressure, DWV, electrical conduit, and PVC foam-core applications. The manufacturer rates it for Schedule 40 pipe through 6 inches and Schedule 80 pipe through 4 inches

Medium-Body Formula – Provides practical gap-filling performance for properly fitted PVC pipe and fittings.
Clear Finished Appearance – Helps create cleaner-looking solvent-welded joints.
Low-VOC Formulation – Part of E-Z Weld’s Enviro product line for reduced hazardous VOC emissions.
Broad PVC Compatibility – Suitable for Schedule 40 PVC through 6 inches and Schedule 80 PVC through 4 inches.
Certified Performance – NSF-certified for drain, waste, and potable-water systems; carries the UPC seal and meets ASTM D2564.
Dauber Included – The manufacturer supplies pint cans with an applicator dauber inside the cap.

Specifications

E-Z Weld Enviro 204 Medium Body Clear PVC Cement – 1 Pint

E-Z Weld Enviro 204 is a low-VOC, medium-body, medium-set clear PVC/uPVC solvent cement designed for joining rigid PVC pipe and socket-style fittings. The one-pint container is suitable for pool and spa plumbing, pressure and non-pressure piping, DWV systems, electrical conduit, potable-water systems, and PVC foam-core pipe when installed according to the product label and applicable codes.

Brand E-Z Weld

Product Line Enviro 204

Product Type PVC/uPVC Solvent Cement

Manufacturer Part No. EZ30403N

Distributor Part No. 410168 / EZW410168

UPC 812574014815

Container Size 1 Pint / 16 fl. oz. / 0.47 L

Applicator Dauber Inside Cap

Color Clear

Body Medium Bodied

Set Speed Medium Set

Schedule 40 Capacity Up to 6 in. Pipe

Schedule 80 Capacity Up to 4 in. Pipe

Application Temperature 32°F–110°F (0°C–43°C)

Storage Temperature 45°F–110°F (7°C–43°C)

Shelf Life 3 Years, Unopened

Key Features & Performance

Low-VOC Formula: Designed as part of the environmentally conscious Enviro line to reduce hazardous VOC emissions compared with conventional formulations.

Gap-Filling Body: Medium-bodied consistency provides useful gap-filling performance on properly prepared PVC pipe and fittings.

Multiple Applications: Suitable for plumbing, pressure and non-pressure systems, drain-waste-vent piping, electrical conduit, PVC foam-core pipe, pool and spa plumbing, and potable-water systems.

Certified Performance: NSF-certified for drain, waste, and potable-water applications, carries the Uniform Plumbing Code seal, and meets ASTM D2564.

Physical Properties: Clear color, medium body, medium set, 0.951 specific gravity, and maximum VOC content of 510 g/L.

💡 Installation & Compatibility

Use the Correct Primer: For superior joint preparation, use E-Z Weld Enviro 211 Clear Primer or Enviro 212 Purple Primer where required by the manufacturer or local plumbing code.
Prepare Both Surfaces: Cut the pipe square, deburr and bevel the end, clean the mating surfaces, and confirm a proper interference fit before applying primer and cement.
Do Not Modify the Cement: Never add thinner, solvent, primer, or other additives. Do not use cement that has become stringy, thickened, or jelly-like.
Allow Adequate Cure Time: Cure time varies with pipe size, temperature, humidity, pressure, and installation conditions. Do not pressurize the system until the required cure period has passed.
Confirm Code Requirements: Verify pipe schedule, diameter, primer requirements, potable-water approval, and local code compliance before completing the joint.

⚠ Safety Warning

This product contains flammable solvents and produces hazardous vapors. Use only with adequate ventilation and keep away from heat, sparks, flames, pilot lights, and other ignition sources.

Avoid breathing vapors and prevent contact with eyes, skin, and clothing. Wear appropriate chemical-resistant gloves and safety glasses. Read the product label and Safety Data Sheet before use.

Do not use inside an occupied building unless adequate mechanical ventilation is provided. Keep the container tightly closed when not in use and keep out of reach of children.