Jandy AquaLink 3.0 Upgrade Kit with RS-PS8 PCB, Bezel, CPU
Bring your pool into the digital age with the Jandy iAquaLink 3.0 Upgrade Kit . This comprehensive kit transforms legacy AquaLink RS or PDA systems into a high-performance, smartphone-controlled hub. By replacing your internal electronics with the latest RS-PS8 PCB and iAquaLink 3.0 Web Interface, you gain instant remote access to your pool and spa settings via the iAquaLink app. It is the most cost-effective way to add modern Wi-Fi connectivity and energy-saving variable speed pump control to your existing equipment pad.
Key Features
- Total System Modernization: Includes a new RS-PS8 Circuit Board, updated CPU, and bezel to replace aging legacy internal components.
- iAquaLink 3.0 Wi-Fi Control: Enables full remote management of your backyard from any mobile device, anywhere in the world.
- 8-Circuit Functionality: Engineered for pool and spa combinations, managing up to 8 distinct features including heaters, pumps, and lighting.
- Smart Home Ready: Fully compatible with Amazon Alexa and Google Assistant for convenient voice-activated pool control.
- Plug-and-Play Upgrade: Designed for straightforward installation into existing AquaLink power centers without requiring new plumbing.
- Stable Connectivity: Features the latest antenna technology for a stronger, more reliable connection to your home network.
Specifications
Part Number
IQ-RS-PS8-UPG
UPC
052337097307
System Type
Pool/Spa Combo
PCB Model
RS-PS8 (Revision Y+)
Connectivity
IQ30-A Antenna (iAquaLink 3.0)
Auxiliary Slots
8 Relays (High Voltage)
Interface
New Bezel w/ CPU
App Compatibility
iOS, Android, Web
Warnings and Disclaimers
- Professional Installation Required: Replacing a motherboard involves high-voltage wiring and complex sensor calibration. Must be installed by a [licensed pool professional](https://www.jandy.com) to maintain the manufacturer's warranty.
- Electrical Hazard: Ensure all power to the main panel is turned off at the breaker. Static electricity can fry the CPU; use a grounding strap during the board swap.
- Compatibility Check: This kit is designed to upgrade legacy [AquaLink RS](https://www.jandy.com) systems. Verify your existing power center model before purchase to ensure the new bezel fits.
- WiFi Band Limitation: The included IQ30-A antenna only supports **2.4GHz networks**. It will not connect to 5GHz-only bands.
- Configuration Loss: Upgrading the board will wipe all current programming. You will need to re-program all pump speeds, heater settings, and light schedules from scratch.
?? Pro-Tips for Success
- Label Your Wires: Before removing the old board, use a permanent marker or masking tape to label every wire (Pump, Heater, Cleaner, Lights). This saves hours of troubleshooting during the install.
- Firmware Advantage: The 3.0 CPU allows for **Over-the-Air (OTA) updates**, meaning your system gets smarter over time without you ever touching the equipment pad again.
- Wired Ethernet: If your WiFi signal is weak at the equipment pad, the IQ30-A antenna features a [hardwired Ethernet port](https://www.jandy.com) for a 100% stable connection.
- VSP Integration: Once the new board is in, you can finally use the advanced [Variable Speed Pump](https://www.jandy.com) management features to dial in the exact RPMs needed for your salt cell or heater to stay engaged.
Jandy
IQ30‑RS
Jandy AquaLink 3.0 Upgrade Kit with RS-PS8 PCB, Bezel, CPU
$1,220.00
/
Shipping calculated at checkout.
Pickup available at Marathon FL
Usually ready in 24 hours
