Achieve strong, permanent, and leak-proof joints on all your PVC projects with E-Z Weld GLGAL-GRY 222 Medium Body Gray PVC Cement. This high-strength, fast-setting gray glue is engineered for both residential and commercial applications, including pressure systems (potable water, irrigation, pool/spa) and non-pressure systems (DWV - Drain, Waste, and Vent).
The medium-body consistency provides a good balance of fill capacity and ease of application for PVC piping and fittings up to 6 inches in diameter (all schedules). The gray color of the cement provides a clean, consistent finished appearance often preferred in industrial or exposed utility applications. This cement meets stringent industry standards (ASTM D2564 and NSF/ANSI 61 certified), ensuring a reliable, code-compliant solvent weld every time.
Key Features
- Medium Body Consistency: Provides excellent gap-filling properties while remaining easy to apply with a brush, suitable for all schedules up to 6" diameter.
- Fast-Setting Formula: Allows for quick pressure testing and project completion, minimizing downtime during installation.
- Versatile Application: Ideal for use in potable water systems, irrigation, pool & spa plumbing, and DWV systems.
- Durable Gray Color: Provides a professional, clean gray finish for exposed piping installations.
- Code Compliant & Certified: Meets industry specifications including ASTM D2564 and is NSF/ANSI 61 listed for use in drinking water applications.
- Low VOC: This product is low in Volatile Organic Compounds, complying with environmental air quality regulations.
Specifications
Product Details
Technical Data & Standards
?? Warnings and Disclaimers
- DANGER: Extremely Flammable Liquid and Vapor. Vapors may cause flash fire. Keep away from heat, sparks, and all ignition sources.
- Health Hazard: Vapors harmful. Use only in well-ventilated areas. May cause skin irritation. Avoid contact with eyes and skin.
- First Aid: If swallowed, call a Poison Control Center immediately. Do not induce vomiting. In case of eye contact, flush with water for 15 minutes and seek medical attention.
- Storage: Store between 40�F and 110�F (4�C and 43�C). Do not freeze. Keep container tightly closed when not in use.
?? Professional Tips
- System Flush: Due to the "gray" color, this cement is typically used for gray Schedule 80 industrial piping and certain DWV (Drain, Waste, Vent) applications where color matching is desired.
- Use with Primer: For best results and code compliance, always use a compatible PVC primer (like the EZ Weld clear or purple primer) *before* applying cement to clean and soften the pipe and fitting surfaces.
- Proper Assembly: Apply an even coat to the pipe end, a slightly heavier coat to the fitting socket, and join quickly with a quarter-turn. Hold firmly for 30 seconds to prevent the joint from pushing back out.
- Pressure Testing: Allow adequate cure time before pressure testing the system. Check the manufacturer's specific cure time chart, as this depends heavily on temperature and pipe size.
Medium Body PVC Cement - Gray (1 Gal)
E-Z WELD
Pickup available at Marathon FL
Usually ready in 24 hours
){kind=link}