Jandy
PSB110
Pool and Spa Air Blower
$230.00
/
Shipping calculated at checkout.
Fast shipping
Ships in 2 to 3 business days
Pickup available at Marathon, FL
Usually ready in 24 hours
Product Description
The Jandy Pool & Spa Air Blower Series (1HP, 1.5HP, & 2HP) delivers powerful, high-volume bubbling for a premium spa experience. Available in 120V and 240V configurations, these blowers feature a high-performance motor designed for long-lasting reliability and quiet operation. Each unit includes a built-in check valve to prevent water from backing into the motor and a durable, weather-resistant housing that stands up to the elements. Whether you need a 1HP boost for a small spa or 2HP for high-flow jets, Jandy blowers provide the consistent air pressure needed for maximum relaxation.
Key Features
- Three Horsepower Options: Available in 1HP, 1.5HP, and 2HP to match any spa size or jet configuration.
- Dual Voltage Models: Specifically engineered units for 120V or 240V electrical setups.
- Integrated Check Valve: Protects the motor from water damage and backflow, ensuring a longer product lifespan.
- Quiet Performance: Advanced motor design and sound-dampening housing minimize noise for a peaceful backyard.
- Rugged Enclosure: UV-resistant, all-weather casing prevents rust and corrosion in harsh environments.
- Standard 2" Plumbing: Designed for easy installation and high-flow air delivery at the equipment pad.
Specifications
Jandy® Pro Series Pool & Spa Blowers
Engineered for quiet operation and high-performance aeration, the Jandy Pro Series Blowers feature a durable, high-impact housing and a unique motor silencer to reduce noise. Designed for easy installation with a built-in check valve and thermal protection for long-lasting reliability.
2.0 HP Blower P/N PSB120
Voltage120V AC
Amperage11.0 Amps
Horsepower2.0 HP
Fitting Size2" Slip
2.0 HP Blower P/N PSB220
Voltage240V AC
Amperage6.0 Amps
Horsepower2.0 HP
Fitting Size2" Slip
1.5 HP Blower P/N PSB115
Voltage120V AC
Amperage8.2 Amps
Horsepower1.5 HP
Fitting Size2" Slip
1.5 HP Blower P/N PSB215
Voltage240V AC
Amperage4.1 Amps
Horsepower1.5 HP
Fitting Size2" Slip
1.0 HP Blower P/N PSB110
Voltage120V AC
Amperage6.3 Amps
Horsepower1.0 HP
Fitting Size2" Slip
1.0 HP Blower P/N PSB210
Voltage240V AC
Amperage3.2 Amps
Horsepower1.0 HP
Fitting Size2" Slip
Safety Warnings & Critical Disclaimers
Shock Hazard: Risk of electrical shock. All blowers must be installed by a licensed electrician. Ensure the unit is connected to a GFCI-protected circuit and properly bonded to the pool grid.
Water Intrusion Danger: Blowers are not submersible. A HARTFORD LOOP (plumbing elevated at least 1 foot above the water level) is mandatory to prevent water from siphoning back into the blower motor, which will cause immediate failure and potential fire hazard.
Thermal Overload: These motors are equipped with an automatic thermal reset. If the unit overheats and shuts off, it will restart automatically once cooled. Ensure adequate ventilation and clear any air intake obstructions immediately.
Piping Constraints: Excessive elbows or pipe runs longer than 50 feet can create backpressure that damages the motor. Ensure the plumbing is sized correctly for the horsepower chosen.
💡 Pro-Tips for Blower Performance
- The "Height" Rule: Always install the blower as high as possible above the water line. This adds a physical barrier against water backup, even if your check valve fails.
- Check Valve Maintenance: The internal check valve is the first line of defense. Inspect it annually for debris or wear; a stuck valve is the #1 cause of blower motor burnouts.
- Avoid Over-Sizing: Installing a 2.0 HP blower on a small spa with few air jets can create "geysering" and excessive noise. Choose the HP that matches the number of jets in your system.
- Sound Dampening: To further reduce noise, install the blower in a well-ventilated enclosure or use a flexible vibration-absorbing mounting pad.
