PH Probe/Sensor with 6m of Cable
Maintain precise water balance in your swimming pool or spa with the
BSV pH Probe/Sensor with 6m Cable (SKU: H035-SPD01-M06)
. This is a genuine, high-quality replacement component designed to work seamlessly with BS Pool automated water quality management systems, including the BSsalt, EVo, and PRO series salt chlorinators.A properly functioning pH sensor is essential for accurate chemical dosing and efficient sanitation. This probe ensures your automated system can reliably monitor and control the water's pH levels, preventing issues like equipment corrosion or swimmer discomfort.
Key Features:
- Accurate pH Monitoring: Provides reliable and consistent measurement of pool water acidity/alkalinity (pH range of 2 to 12 according to similar SEKO SPH-1-S-6MT specs).
- Extended Cable Length: The generous 6-meter (approx. 20 feet) shielded coaxial cable allows for flexible installation, easily connecting the probe in a flow cell or inline application to your controller, even when the controller is not in close proximity.
- Durable Construction: Features a rugged body material and a gel-filled reference system designed for longevity and dependable use in chlorinated and chemically treated water.
- Standard BNC Connector: Equipped with a universal BNC connector for simple, hassle-free installation and compatibility with a wide range of metering pumps and controllers.
- Essential Maintenance Part: An ideal replacement or spare part to ensure continuous, high-precision monitoring of your pool chemistry.
Specifications
Product Name
BSV pH Probe/Sensor with 6m Cable
Manufacturer / Brand
BSV (BS Pool)
SKU / Item Code
H035-SPD01-M06
Measurement Range
0 to 14 pH (Span 0-14 pH)
Pressure Rating
0 to 4 bar (Approx. 58 PSI)
Connector Type
Universal BNC
Cable Length
6 Meters (Approx. 20 Feet)
Body Material
Polycarbonate / Pellon-HDPE Junction
Temperature Range
0 to 60�C (32 to 140�F)
Dimensions
Length: 150mm | Diameter: 12mm
Calibration & Maintenance Warnings
- Calibration: Always calibrate the probe upon first installation and every 1-2 months thereafter using standard pH 7.0 and pH 4.0 buffer solutions.
- Storage: Never allow the probe tip to dry out. Always store in a [pH Storage Solution (KCl)](https://www.google.com) or pH 4.0 buffer when not installed.
- Installation: Ensure the probe is installed vertically or at a maximum angle of 45� to ensure the internal electrolyte remains in contact with the bulb.
- Cable Protection: Do not pull the 6m coaxial cable excessively or run it alongside high-voltage lines, as electrical interference can cause erratic readings.
Pro Tips
- Cleaning: If the response time slows down, soak the probe tip in a [Liquid Cell Cleaner](https://www.google.com) or a mild dish soap solution for 15 minutes to remove oils and calcium buildup.
- System Compatibility: While designed for BSV BSsalt, EVo, and PRO series chlorinators, the standard BNC connector makes this compatible with most [Pool Chemistry Controllers](https://www.google.com) like Pentair, Hayward, or SEKO.
- Response Time: This probe features a 95% response time in under 1 second; if your controller shows a "Stable" reading much slower than this, it may be time to replace the electrode.
- Winterization: Remove the probe during winter months in freezing climates. Store it indoors in a protective cap filled with KCl solution to extend its typical 18-24 month lifespan.
H035-SPD01-M06
PH Probe/Sensor with 6m of Cable
$95.00
/
Shipping calculated at checkout.
Bspool
Pickup available at Marathon FL
Usually ready in 24 hours
