Clear Primer 1qt
E-Z Weld Clear Primer (1 Quart), a solvent blend used to prepare and soften PVC and CPVC pipes before solvent welding.
Product Details
- Product Name: E-Z Weld 211 PVC Clear Primer, 1 Quart
- Manufacturer: E-Z Weld (Marvin Bochner, Inc.)
- Part Number: 410001 (also referred to as EZ31104N or GLQTS-PR by retailers)
- UPC: 812574100013
- Purpose: A fast-acting blend of solvents formulated to penetrate, soften, and swell the surface of PVC and CPVC pipes and fittings to create a stronger, more reliable joint when used with appropriate solvent cement.
- Cured Color: Clear
- Standards: Meets ASTM F656 specifications and is NSF/ANSI 61 and IAPMO Listed (UPC seal certified) for use on potable water, drain, waste, and vent systems.
- Application Temperature Range: Recommended for use in temperatures ranging from -10°F to 110°F (-23°C to 43°C).
- VOC Content: 550 g/L.
Specifications
Product Name
E-Z Weld 211 Clear PVC Primer (1 Quart)
Manufacturer
E-Z Weld (Marvin Bochner, Inc.)
Part Number / SKU
410001 (or EZ31104N)
UPC / GTIN
812574100013
Cured Color
Clear
Volume
1 Quart (32 fl oz / 946 mL)
Application Type
Brush-on (Dauber included in lid)
Material Compatibility
PVC and CPVC pipe and fittings
Safety Warnings & Certifications
- Highly Flammable: Contains Acetone and Tetrahydrofuran (THF). Keep away from sparks, open flames, and heat sources. Do not smoke during use.
- Ventilation: Use only in a well-ventilated area to avoid inhaling vapors. Use respiratory protection if necessary.
- Safety Gear: Wear appropriate safety goggles and chemical-resistant gloves (e.g., neoprene or butyl rubber) to prevent skin and eye contact.
- Certifications: Meets ASTM F656 standards and is NSF/ANSI 61 certified for potable (drinking) water applications.
Pro Tips
- Do Not Wipe: The purpose of primer is to chemically soften the plastic surface. Do not wipe off excess; apply cement while the primer is still visibly wet/tacky.
- Temperature Use: Can be used in low temperatures down to -10�F, but curing times for the cement will be significantly longer. In hot weather, the application process must be done quickly.
- Storage: Store the can upright with the lid tightly sealed in a cool, dry place. Vapors are heavy and can seep out if the lid is loose.
- System Flush: For potable water systems, flush the lines thoroughly with clean water for several minutes after the cement has fully cured to remove residual solvent odors.
E-Z WELD
410001
Clear Primer 1qt
Shipping calculated at checkout.
Pickup available at Marathon FL
Usually ready in 24 hours
